1177 お客様のコメント
質問 1：
If a multicast user under the MA5600 is watching a multicast program while spending time, which of the following may be the cause of this problem?
A. Upstream port interruption
B. Lost Routes of Upstream Devices
C. The downlink bandwidth parameter in the line-profile bound to the ADS port is too small.
D. None of the above
正解：C
質問 2：
OLT usually adopts queue scheduling technology to solve the problem of traffic congestion.
How many queues does MA5600T/MA5680T have?
A. 8
B. 4
C. 16
D. 2
正解：A
質問 3：
Is the following description correct?
T.38 fax is much more resistant to network jitter, packet loss and delay than transparent transmission. T.30 fax is sensitive to the quality of the network. If the network is not in good condition, the fax will fail.
A. False
B. True
正解：B
質問 4：
After installing the sybase patch, which of the following commands can display the version information of the installed sybase patch?
A. 1>version_help2>go
B. 1>select @@patch2>go
C. 1>select @@version2>go
D. 1>ver_help2>go
正解：C
質問 5：
Is the following description correct?
MA5600T/MA5680T supports VLAN tag transformation. When SVLANs with different attributes pass through, service-ports can create service flows. If tag-transform is set to default, the Tag conversion rule is different.
A. TRUE
B. FALSE
正解：A
質問 6：
When using the command line to upgrade the MDU, you need to upload the new version of the package file to the MDU.
What are the main transmission methods for uploading package files?
A. wftp
B. tftp
C. ftp
D. Xmodem
正解：B,C
質問 7：
How many bytes are included in the EthernetII packet header (without VLAN TAG)?
A. 14
B. 32
C. 22
D. 18
正解：A
質問 8：
Take the MA5600 as an example. If you need to analyze the faulty service through the performance statistics provided by the MA5600 and find faults, which of the following commands should be used to query system performance statistics?
A. huawei （ config-if-SCU-0/7 ) #display port statistics 0
B. huawei （ config-if-SCU-0/7 ) #display port opticstate all
C. huawei （ config-if-SCU-0/7 ) #display port state 0
D. huawei （ config-if-SCU-0/7 ) #display port traffic 0
正解：A
If a multicast user under the MA5600 is watching a multicast program while spending time, which of the following may be the cause of this problem?
A. Upstream port interruption
B. Lost Routes of Upstream Devices
C. The downlink bandwidth parameter in the line-profile bound to the ADS port is too small.
D. None of the above
正解：C
質問 2：
OLT usually adopts queue scheduling technology to solve the problem of traffic congestion.
How many queues does MA5600T/MA5680T have?
A. 8
B. 4
C. 16
D. 2
正解：A
質問 3：
Is the following description correct?
T.38 fax is much more resistant to network jitter, packet loss and delay than transparent transmission. T.30 fax is sensitive to the quality of the network. If the network is not in good condition, the fax will fail.
A. False
B. True
正解：B
質問 4：
After installing the sybase patch, which of the following commands can display the version information of the installed sybase patch?
A. 1>version_help2>go
B. 1>select @@patch2>go
C. 1>select @@version2>go
D. 1>ver_help2>go
正解：C
質問 5：
Is the following description correct?
MA5600T/MA5680T supports VLAN tag transformation. When SVLANs with different attributes pass through, service-ports can create service flows. If tag-transform is set to default, the Tag conversion rule is different.
A. TRUE
B. FALSE
正解：A
質問 6：
When using the command line to upgrade the MDU, you need to upload the new version of the package file to the MDU.
What are the main transmission methods for uploading package files?
A. wftp
B. tftp
C. ftp
D. Xmodem
正解：B,C
質問 7：
How many bytes are included in the EthernetII packet header (without VLAN TAG)?
A. 14
B. 32
C. 22
D. 18
正解：A
質問 8：
Take the MA5600 as an example. If you need to analyze the faulty service through the performance statistics provided by the MA5600 and find faults, which of the following commands should be used to query system performance statistics?
A. huawei （ config-if-SCU-0/7 ) #display port statistics 0
B. huawei （ config-if-SCU-0/7 ) #display port opticstate all
C. huawei （ config-if-SCU-0/7 ) #display port state 0
D. huawei （ config-if-SCU-0/7 ) #display port traffic 0
正解：A
堀口** -
合格いたしました。Pass4Testさんほんとうにすごい。このPass4Testが出る試験対策本はH35-211-ENUの出題範囲をカバーした参考書だな