665 お客様のコメント
質問 1：
A customer is planning to buy a two enclosure Power 770, and will implement 4 LPARs with the following requirements:Each LPAR must have a private, dedicated connection to the network.The adapter for this network connection must be hot-swappable.The customer wants to minimize the number of I/O slots used.Which of the following fulfills the customer requirements?
A. Four separate PCIe Ethernet adapters
B. Two embedded Integrated Virtual Ethernet adapters (IVE)
C. Two dual-port PCIe adapters
D. A four-port PCIe Ethernet adapter
正解：A
質問 2：
A customer has shut down an LPAR after using DLPAR to add or remove processor and memory resources. When the partition is reactivated, the desired changes are missing.What action, or sequence of actions, will immediately and permanently solve this problem?
A. Add or remove the resources in the profile, click 'apply', then 'save'.
B. Add or remove the resources using DLPAR, then shutdown and reactivate the LPAR.
C. Add or remove the resources using DLPAR and change the partition profile.
D. Add or remove the resources in the system profile and reboot the managed system.
正解：C
質問 3：
Which Power Systems model has a separate SAS controller for the media bay, permitting it to be independently switchable?
A. Power 770
B. Power 730
C. Power 740
D. Power 720
正解：A
質問 4：
A customer is unsure how POWER7 processors can outperform POWER6 processors when the clock speeds are slower. What contributes to the improved performance?
A. Moved L3 cache onto the chip
B. Added Turbo memory switching
C. Increased DDR2 memory speeds
D. Removed internal OLTP limits
正解：A
質問 5：
A customer is buying 10 new Power 720 servers and will integrate them into their existing data center which also has two Power 595s and five Power 750s, taking the total number of systems to
17. All currently installed systems are managed by a single HMC.All the machines will have dual VIO Servers for redundancy, and 10 client LPARs.How can they manage the new machines for the least cost?
A. Connect all of the new servers to the existing private HMC network.
B. Purchase a second HMC and use this to manage the new servers.
C. Connect 9 of the new servers to the existing HMC and use Integrated Virtualization Manager on the 10th.
D. Configure a second private network on their existing HMC for the new servers.
正解：A
質問 6：
What is a design consideration when using existing PCIe I/O drawers in a maximum bandwidth/throughput configuration on a new Power 750 system?
A. The new system requires 1 installed processor card for the GX++ bus adapter
B. The new system requires 1 installed processor card for the GX++ bus adapter and the HPC InfiniBand cluster adapter
C. The new system requires a minimum of 3 installed processor cards and the HPC InfiniBand cluster adapter
D. The new system requires a minimum of 2 installed processor cards for the GX++ bus adapter
正解：D
質問 7：
A company plans to deploy a two-enclosure, 23-core Power 780 system with AIX, IBM i and Linux in the following configuration:
3 AIX partitions with dedicated network and disk adapters
1 native IBM i partition acting as a host
1 hosted IBM i partition
2 hosted Linux partitions
Which configuration will provide boot disk capability to all partitions?
A. Put each partition on a dedicated controller using the triple-split backplane option in both enclosures.
B. Use the triple-split backplane option in one enclosure for the AIX partitions, and the non-split backplane mode in the second enclosure for the IBM i hosting partition.
C. Use dual-split backplane in both enclosures for the three AIX partitions and the IBM i partition.
D. Use the triple-split backplane option in one enclosure for the AIX partitions, and the default dual-split backplane for the IBM i partition in the second enclosure.
正解：B
質問 8：
When considering migrating a POWER6 server with PCI-X and PCIe adapters to a Power 720, which statement is true?
A. PCI-X adapters are supported in the CEC; PCIe adapters are supported in 12X I/O drawers
B. PCI-X adapters are supported in both the CEC and in I/O drawers
C. PCIe adapters are supported in the CEC; PCI-X adapters are supported in 12X I/O drawers
D. PCIe adapters are supported only in I/O drawers
正解：C
A customer is planning to buy a two enclosure Power 770, and will implement 4 LPARs with the following requirements:Each LPAR must have a private, dedicated connection to the network.The adapter for this network connection must be hot-swappable.The customer wants to minimize the number of I/O slots used.Which of the following fulfills the customer requirements?
A. Four separate PCIe Ethernet adapters
B. Two embedded Integrated Virtual Ethernet adapters (IVE)
C. Two dual-port PCIe adapters
D. A four-port PCIe Ethernet adapter
正解：A
質問 2：
A customer has shut down an LPAR after using DLPAR to add or remove processor and memory resources. When the partition is reactivated, the desired changes are missing.What action, or sequence of actions, will immediately and permanently solve this problem?
A. Add or remove the resources in the profile, click 'apply', then 'save'.
B. Add or remove the resources using DLPAR, then shutdown and reactivate the LPAR.
C. Add or remove the resources using DLPAR and change the partition profile.
D. Add or remove the resources in the system profile and reboot the managed system.
正解：C
質問 3：
Which Power Systems model has a separate SAS controller for the media bay, permitting it to be independently switchable?
A. Power 770
B. Power 730
C. Power 740
D. Power 720
正解：A
質問 4：
A customer is unsure how POWER7 processors can outperform POWER6 processors when the clock speeds are slower. What contributes to the improved performance?
A. Moved L3 cache onto the chip
B. Added Turbo memory switching
C. Increased DDR2 memory speeds
D. Removed internal OLTP limits
正解：A
質問 5：
A customer is buying 10 new Power 720 servers and will integrate them into their existing data center which also has two Power 595s and five Power 750s, taking the total number of systems to
17. All currently installed systems are managed by a single HMC.All the machines will have dual VIO Servers for redundancy, and 10 client LPARs.How can they manage the new machines for the least cost?
A. Connect all of the new servers to the existing private HMC network.
B. Purchase a second HMC and use this to manage the new servers.
C. Connect 9 of the new servers to the existing HMC and use Integrated Virtualization Manager on the 10th.
D. Configure a second private network on their existing HMC for the new servers.
正解：A
質問 6：
What is a design consideration when using existing PCIe I/O drawers in a maximum bandwidth/throughput configuration on a new Power 750 system?
A. The new system requires 1 installed processor card for the GX++ bus adapter
B. The new system requires 1 installed processor card for the GX++ bus adapter and the HPC InfiniBand cluster adapter
C. The new system requires a minimum of 3 installed processor cards and the HPC InfiniBand cluster adapter
D. The new system requires a minimum of 2 installed processor cards for the GX++ bus adapter
正解：D
質問 7：
A company plans to deploy a two-enclosure, 23-core Power 780 system with AIX, IBM i and Linux in the following configuration:
3 AIX partitions with dedicated network and disk adapters
1 native IBM i partition acting as a host
1 hosted IBM i partition
2 hosted Linux partitions
Which configuration will provide boot disk capability to all partitions?
A. Put each partition on a dedicated controller using the triple-split backplane option in both enclosures.
B. Use the triple-split backplane option in one enclosure for the AIX partitions, and the non-split backplane mode in the second enclosure for the IBM i hosting partition.
C. Use dual-split backplane in both enclosures for the three AIX partitions and the IBM i partition.
D. Use the triple-split backplane option in one enclosure for the AIX partitions, and the default dual-split backplane for the IBM i partition in the second enclosure.
正解：B
質問 8：
When considering migrating a POWER6 server with PCI-X and PCIe adapters to a Power 720, which statement is true?
A. PCI-X adapters are supported in the CEC; PCIe adapters are supported in 12X I/O drawers
B. PCI-X adapters are supported in both the CEC and in I/O drawers
C. PCIe adapters are supported in the CEC; PCI-X adapters are supported in 12X I/O drawers
D. PCIe adapters are supported only in I/O drawers
正解：C
Minayama -
000-106の試験対策としてはとても良い。
試験でも模擬試験と同じような問題がでました。役に立ちました。
ありがとうございました。