最新なIBM C4120-784問題集（70題）、真実試験の問題を全部にカバー！

質問 1：
The client's RFP requests a solution with a 50% compression ratio.

Given the Capacity Magic sizing output, what licensing option would be needed to enable Real-time Compression for the Flex System V7000 Storage Node?
A. 47 TB
B. 5 enclosures
C. 23 TB
D. 1 enclosure
正解：B

質問 2：
A client has expressed a desire to utilize an existing current model HMC to manage Power compute nodes in a Flex Chassis which also contains x86 compute nodes and an IBM Flex System V7000 Storage Node. The client also stated the ability to have SAN zones automatically built when creating storage volumes is more important in this environment. How should a technical expert respond to these statements?
A. Use an FSM and an HMC to manage the individual tasks.
B. Utilize only an FSM to manage the entire environment.
C. Install the IBM Network Advisor Power Compute Node plugin into the HMC.
D. An HMC used with IBM Network Advisor will satisfy both requirements.
正解：B

質問 3：
Exhibit: The Managed Service Provider is considering a PureFlex or Flex System solution but wants to ensure that it integrates with their existing Storwize V7000 environment. They need to be able to rapidly expand their storage while continuing to manage it as a single entity. What is the best solution for this scenario?

IBM 000-784 Exam
A. Flex System with Storwize V7000 Unified
B. PureFlex with Storwize V7000
C. PureFlex with Flex System V7000 Storage NodePureFlex with Flex System V7000 Storage Node
D. Flex System with Storwize V3700
正解：B

質問 4：
The client has three independent redundant SAN fabrics: One for development, one for validation and one for production. The client will use a chassis with x240 nodes to connect these SAN fabrics. What is the best solution for the client?
A. Use two CN4058 adapters and two CN4093 switches, each with two FoD enhancements
B. Use one CN4054 adapter, LOM, and four CN4093 switches with FoD enhancements throughout
C. Use two CN4058 adapters and four EN4093 switches, each with one FoD enhancement
D. Use two CN4054 adapters and two EN4093 switches, each with two FoD enhancements
正解：B

質問 5：
The client is consolidating the critical SAP infrastructure on Power p260 nodes. Which configuration will support the dual VIOS configuration required by this client?
A. p260 node with 1 x EN4054 and 1 x FC5052 2-port 16Gb Fibre Channel adapter
B. p260 node with 1 x EN4054 and 1 x FC3172 2-port 8Gb Fibre Channel adapter
C. p260 node with 2 x EN4054 4-port 10Gb Ethernet adapters
D. p260 node with 2 x CN4058 8-port 10Gb Converged adapters
正解：D

質問 6：
On a PureFlex system, how can an FSM be recovered if the management software is inoperable because of misconfiguration or corruption, but the management node hardware is operational and the hard drives have not failed?
A. Call smcli restore from the FSM CLI to restore the FSM
B. Connect to the Internet, download a new FSM image and install it over the IMM connection to the FSM
C. Boot while pressing F12 and select the recovery partition as the boot device, then run a full system recovery
D. Call IBM Support and request a replacement of the FSM ITE
正解：C

質問 7：
A Flex System prospect is evaluating IBM Flex System x86 compute nodes and the Flex System Manager (FSM). This prospect will adopt a dual-vendor strategy, and prefers to manage all vendors' ESXi hosts via a single console. Which of the following options best meets their management needs?
A. IBM Flex System Manager advanced upgrade feature set
B. IBM Upward Integration for Microsoft System Center
C. IBM Upward Integration for VMware vSphere
D. IBM Flex System Manager base feature set
正解：C