1091 お客様のコメント
質問 1：
What minimum hardware and software levels are required to host IBM i on other IBM i partitions?
A. POWER6+ or newer, IBM i 7.1 or newer
B. POWER6 or newer, IBM i 6.1 or newer
C. POWER5+ or newer, IBM i 5.4 or newer
D. POWER5+ or newer, IBM i 6.1 or newer
正解：B
質問 2：
What the minimum required in order to attach Storwize V7000 LUNs to VIO Server and virtualize them to IBM i?
A. PowerVM Enterprise Edition.
B. AIX/VIOS Host Kit license for the Storage Subsystem and IBM External StorageCompatibility5733-ES1
C. PowerVM Standard Edition.
D. PowerVM Standard Edition and AIX/VIOS Host Kit license for the Storage Subsystem.
正解：C
質問 3：
An administrator used IVM to assign a new tape drive to an IBM i partition running on a POWER blade. The administrator verified that the IVM has created the appropriate vSCSl connections between VIO Server and the IBM i partition.
The administrator sees the hardware resource within IBM i, but the associated device description is missing. What is the most likely reason this is occurring?
A. The QAUTOCFG system value on the IBM i partition is set to"0"(off).
B. The hardware resource was not enabled through Virtual Partition Manager.
C. The devices have not been assigned using the Media Tray Selector button.
D. The resource was not defined to VIO Server as a dynamic adapter.
正解：A
質問 4：
A hosted IBM i partition with SAN-based disk is to be configured with mirrored disks. In order to maximize performance of the partition, where should the disk mirroring be performed?
A. In the IBM i partition
B. In the SAN Volume Controller
C. In the disk subsystem
D. In the VIO Server partition
正解：C
質問 5：
An administrator has an IBM i 7.1 hosting partition with TP 4 installed. The administrator is designing Ethernet communications for 5 client IBM i LPARs. The managed system has only one Ethernet adapter with a single port available.
The partitions must be separated and secured from each other.
Which solution will provide Ethernet connectively at the lowest cost?
A. In each of the client IBM i LPARs, design a packetfilterto only accept inbound packets from the gateway router MAC address.
B. Design an IBM i bridged VLAN for each of the partitions.
C. Design a virtual LAN connecting each LPAR with a different IP subnet.
D. Specifyusing the CCA Cryptographic Service Provider(option 35 of 5770-SS1) to encrypt each of the Ethernet connections with a public/private key combination.
正解：B
質問 6：
A system administrator has configured 3 partitions, each using 1 of 3 shared processor pools. All are active and working as designed.
One of the partitions using one of the shared processor pools will be shut down and the resources allocated to the other 2 pools.
Which is the correct sequence of actions to accomplish the goal?
A. Change the minimum processor for the partition to zero.
Shut down the partition by deactivating it from the HMC.
Delete the shared-processor pool.
B. Shut down the partition that is using the shared processor pool.
Change the maximum processing units to zero.
Assign the processor capacityto another pool.
C. Merge the shared-processor pool to be removed into one of the other pools.
Shut down the partition by deactivating it from the HMC.
Plush the memory cache by deactivating the shared-processor pool.
Delete the shared-processor pool.
D. Create a new shared-processor pool.
Merge all three shared-pools into the new pool using Live Partition Mobility
Shut down and remove the partition definition.
正解：B
質問 7：
What is the tool used to aid in upgrade planning for interdependencies of HMC and system firmware upgrades?
A. Pre-Upgrade Verification Tool
B. IBM Fix Level Recommendation Tool
C. Firmware Validation Tool
D. System Planning Tool
正解：B
質問 8：
A customer has a single partition Power 720 running IBM i with PowerVM Express, LAN Console, and extra disk and memory capacity.
Management wants a small IBM i partition added to the system for testing.
Which option supports the requirement with minimal disruption to production?
A. Implement VIO Server to host the test partition.
B. Create a guest IBM i partition on the existing partition.
C. Acquire an HMC and partition the system.
D. Implement VIO Serverto host both partitions as clients.
正解：B
質問 9：
Auditors have reviewed access to the HMC and determined that many users have too much authority on the HMC. What is the correct method to restrict users to only a specific set of resources?
A. Create and assign a new task role that allows only the required set of tasks.
B. Change the users' task role to hmcoperator.
C. Create and assign a new resource role that allows access to only the required resources.
D. In Manage Users and Tasks, select each resource that is required for this user.
正解：C
What minimum hardware and software levels are required to host IBM i on other IBM i partitions?
A. POWER6+ or newer, IBM i 7.1 or newer
B. POWER6 or newer, IBM i 6.1 or newer
C. POWER5+ or newer, IBM i 5.4 or newer
D. POWER5+ or newer, IBM i 6.1 or newer
正解：B
質問 2：
What the minimum required in order to attach Storwize V7000 LUNs to VIO Server and virtualize them to IBM i?
A. PowerVM Enterprise Edition.
B. AIX/VIOS Host Kit license for the Storage Subsystem and IBM External StorageCompatibility5733-ES1
C. PowerVM Standard Edition.
D. PowerVM Standard Edition and AIX/VIOS Host Kit license for the Storage Subsystem.
正解：C
質問 3：
An administrator used IVM to assign a new tape drive to an IBM i partition running on a POWER blade. The administrator verified that the IVM has created the appropriate vSCSl connections between VIO Server and the IBM i partition.
The administrator sees the hardware resource within IBM i, but the associated device description is missing. What is the most likely reason this is occurring?
A. The QAUTOCFG system value on the IBM i partition is set to"0"(off).
B. The hardware resource was not enabled through Virtual Partition Manager.
C. The devices have not been assigned using the Media Tray Selector button.
D. The resource was not defined to VIO Server as a dynamic adapter.
正解：A
質問 4：
A hosted IBM i partition with SAN-based disk is to be configured with mirrored disks. In order to maximize performance of the partition, where should the disk mirroring be performed?
A. In the IBM i partition
B. In the SAN Volume Controller
C. In the disk subsystem
D. In the VIO Server partition
正解：C
質問 5：
An administrator has an IBM i 7.1 hosting partition with TP 4 installed. The administrator is designing Ethernet communications for 5 client IBM i LPARs. The managed system has only one Ethernet adapter with a single port available.
The partitions must be separated and secured from each other.
Which solution will provide Ethernet connectively at the lowest cost?
A. In each of the client IBM i LPARs, design a packetfilterto only accept inbound packets from the gateway router MAC address.
B. Design an IBM i bridged VLAN for each of the partitions.
C. Design a virtual LAN connecting each LPAR with a different IP subnet.
D. Specifyusing the CCA Cryptographic Service Provider(option 35 of 5770-SS1) to encrypt each of the Ethernet connections with a public/private key combination.
正解：B
質問 6：
A system administrator has configured 3 partitions, each using 1 of 3 shared processor pools. All are active and working as designed.
One of the partitions using one of the shared processor pools will be shut down and the resources allocated to the other 2 pools.
Which is the correct sequence of actions to accomplish the goal?
A. Change the minimum processor for the partition to zero.
Shut down the partition by deactivating it from the HMC.
Delete the shared-processor pool.
B. Shut down the partition that is using the shared processor pool.
Change the maximum processing units to zero.
Assign the processor capacityto another pool.
C. Merge the shared-processor pool to be removed into one of the other pools.
Shut down the partition by deactivating it from the HMC.
Plush the memory cache by deactivating the shared-processor pool.
Delete the shared-processor pool.
D. Create a new shared-processor pool.
Merge all three shared-pools into the new pool using Live Partition Mobility
Shut down and remove the partition definition.
正解：B
質問 7：
What is the tool used to aid in upgrade planning for interdependencies of HMC and system firmware upgrades?
A. Pre-Upgrade Verification Tool
B. IBM Fix Level Recommendation Tool
C. Firmware Validation Tool
D. System Planning Tool
正解：B
質問 8：
A customer has a single partition Power 720 running IBM i with PowerVM Express, LAN Console, and extra disk and memory capacity.
Management wants a small IBM i partition added to the system for testing.
Which option supports the requirement with minimal disruption to production?
A. Implement VIO Server to host the test partition.
B. Create a guest IBM i partition on the existing partition.
C. Acquire an HMC and partition the system.
D. Implement VIO Serverto host both partitions as clients.
正解：B
質問 9：
Auditors have reviewed access to the HMC and determined that many users have too much authority on the HMC. What is the correct method to restrict users to only a specific set of resources?
A. Create and assign a new task role that allows only the required set of tasks.
B. Change the users' task role to hmcoperator.
C. Create and assign a new resource role that allows access to only the required resources.
D. In Manage Users and Tasks, select each resource that is required for this user.
正解：C
原*里 -
A4040-121過去問を徹底研究し、繰り返し出題されている頻出の過去問(類似問題)のみを厳選して掲載しているね。