In a WLAN network, how many spatial streams can a single radio support at most according to the 802.11ac and 802.11ax protocols?
A. 8
B. 10
C. 6
D. 12
正解:A
質問 2:
WLAN Planner supports sharing function. The sharing function shares the source file. The party being shared can edit, share or delete the project.
A. False
B. True
正解:A
質問 3:
In a wireless mesh network, the node with portal function that can realize communication between the internal nodes of the mesh and the external network is ()
正解:
MPP
質問 4:
Place the following WLAN-fault troubleshooting steps in the correct order.

正解:

Explanation:
1. Fault detection; 2. Fault information collection; 3. Fault information analysis; 4. Fault locating; 5. Fault rectification Huawei's WLAN troubleshooting methodology follows a structured progression that separates fault identification, evidence collection, technical analysis, root-cause localization, and corrective action.
Performing these activities in the correct sequence reduces unnecessary configuration changes and improves troubleshooting efficiency.
The first phase, fault detection, establishes that an abnormal condition exists. Engineers identify the affected services, observed symptoms, failure severity, and approximate occurrence time.
During fault information collection, engineers gather relevant evidence from the affected devices and network infrastructure. This includes device configurations, system logs, interface information, software versions, alarm records, and diagnostic results.
Fault information analysis follows. Engineers examine the collected data to identify abnormal behavior, correlate events, and formulate hypotheses about the underlying fault.
During fault locating, those hypotheses are tested to isolate the failure to a particular device, interface, configuration, protocol exchange, or network component.
Finally, fault rectification involves implementing the appropriate corrective action. Engineers must consider potential service impact before changing configurations and verify that normal operation has been restored afterward.
The sequence is important because applying corrective actions without adequate diagnosis can obscure the original fault, introduce additional failures, or prolong service interruption.
This five-stage process is explicitly presented in Huawei's WLAN troubleshooting course.
Training Material reference: WLAN Troubleshooting # Overview of WLAN Troubleshooting # Troubleshooting Process.
Lab Guide reference: Lab 12 - Comprehensive Troubleshooting.
質問 5:
In a WLAN network, the working status of the AP will be affected by the surrounding environment.
To avoid signal interference, it is recommended that adjacent APs work on non-heavy channels.
The following figure shows different channel planning methods for four APs. Which of the following options are in line with the channel planning principles and have the least interference between APs? (Multiple choice)

A. 5G (20 MHz) channel planning method 2
B. 2.4G (20MHz) channel planning method 2
C. 5G (20 MHz) channel planning method 1
D. 2.4G (20 MHz) channel planning method 1
正解:C,D
質問 6:
In Portal authentication scenarios where the WAC acts as the access device, Portal users cannot be authenticated. Which of the following could cause this issue?
CHOOSE FOUR
A. STA address learning is disabled on the WAC.
B. The Portal server detection function is enabled on the WAC, but not on the Portal server.
C. The destination port configured on the WAC for communication with the Portal server differs from the listening port configured on the Portal server.
D. The shared key configured on the WAC is different from that on the Portal server.
正解:A,B,C,D
解説: (Pass4Test メンバーにのみ表示されます)
質問 7:
Radio calibration is a radio resource management solution that enables a WLAN to quickly adapt to radio environment changes. Which of the following is not involved in the radio calibration process?
A. Channel adjustment
B. Neighbor probe
C. Load balancing
D. Power adjustment
正解:C
解説: (Pass4Test メンバーにのみ表示されます)
質問 8:
When using built-in Portal authentication, the access device usually provides built-in Portal server function in HTTPS mode. If the access device is not configured with a trusted certificate, the client browser will not trust the default self-signed certificate of the access device and will pop up a security certificate warning message.
A. False
B. True
正解:B
1069 お客様のコメント






矢野** -
ネットから調べさせて、Pass4Testという素晴らしいサイトに出会いました。