質問 1：
Which OQL query determines the SNMP access status of seeded devices?
A. select" from translations.ipToBaseName;
B. select* from Details.returns;
C. select* from Details despatch;
D. select "from finders.processing;
正解：B
質問 2：
What is required to install IBM Tivoli Network Manager IP Edition V3.9 on a Windows Server 2008 system?
A. The user must be configured in the IBM DB2 NCIM database
B. The user must be the administrator.
C. The tipadmin user must be created on thesystem.
D. The user must be IBM Tivoli Netcool/OMNIbus.
正解：B
質問 3：
Which two polling methods can be used for Active Polling in IBM Tivoli Network Manager IP Edition V3.9 (ITNM)? (Choose two.)
A. ICMP Polling
B. SNMP TrapReception
C. CLI-based Demand/Response Polling
D. Adaptive Polling
E. SNMP Polling
正解：A,E
質問 4：
During a deployment, a customer has identified location data that they would like added to both chassis and interface events from active (IBM Tivoli Network Manager IP Edition V3.9 (ITNM)) and passive (traps, syslog etc.) event sources.
This data has been successfully imported into the Discovery process using supported stitching techniques and appears in the topology as three custom Extralnfo fields (see below).
Ncpjnode1 has been configured to transfer this location data to a custom extended NCIM database table named locations (see exhibit below). This data is only held on EntityType 1 (chassis entities) to reduce the NCIM load.
The customer has identified three ObjectServer fields that they would like this data :o be added to for all suitable events-NmosGeography, NmosCountry, and NmosSite
Example record in Model Description of the ncim.locations table
The ModelNcimDb cofiguration has been modified to map:
Based on the scenario, what is the correct stitcher method to populate a record with Extralnfo > m_Geogrpahy location data and then update the NmosGeography ObjectServer field?
Assume that a chassis and locationData Records have been defined and the mainNodeld is set to the Entityld of the chassis of the in scope event.
Example:
Record chassis;
Record locationData.
text geog-'.
chassis = GwEntityData( mainNodeld);
A. NmosGeography = eval(text, '&8<Extralnfo->m_Geography'); GwEnrichEvent (NmosGeography);
B. NmosGeogrpahy = @chassis.locations.GEOGRAPHY; @locationData.NmosGeography = eval(text, '$NmosGeography'); GwEnrichEvent (locationData);
C. [email protected]_Geography; @locationData.NmosGeography = geog; GwEnrichEvent(locationData);
D. [email protected]; @locationData.NmosGeography = geog. GwEnrichEvent( locationData);
正解：D
質問 5：
The scope of thediscovery contains the IBM Tivoli Network Manager IP Edition V3.9 (ITNM) server and the gateway trace file shows that this is being used successfully as the correct NcpServerEntity. However, the isolated suppression method is not working. What would causethis?
A. There was no SNMP access to the ITNM server so the IP address is not known.
B. The ITNM server is not being directly polled for status.
C. The ITNM server is not connected to the rest of the topology.
D. The Root Cause Analysis plug-in has not been explicitly configured to use the ITNM server.
正解：C
質問 6：
When performing a full or partial rediscovery, what does the m_Rebuildl_ayers=1 option do in IBM Tivoli Network Manager IP Edition V3.9?
A. Disco rebuilds topology on partial but not on full discovery cycles.
B. Disco rebuilds the entire topology only on scheduled discovery cycles.
C. Disco rebuilds the entire topology on partial discovery cycles.
D. Disco does not build connectivity tables on any discovery cycles.
正解：C
質問 7：
A new poll has been defined within IBM Tivoli Network Manager IP Edition V3.9 (ITNM) and this generates an event into the ObjectServer asexpected. What is the default behavior for ITNM events within the EventGateway and root cause analysis (RCA) plug-in?
A. Events generated by the ITNM poller have to be explicitly defined to be passed to the RCA plug-in.
B. The RCA plug-in receives events directly from the poller and do not need to pass through the EventGateway.
C. Events generated by the ITNM poller will be passed to the RCA plug-in by default.
D. Events generated by the ITNM poller are not suitable for use within RCA calculations.
正解：A
質問 8：
Which command allows access to the alerts.status table from the IBM Tivoli Network Manager IP Edition V3.9 server?
A. ncp_oql -service ObjectServer -domain <ITNM_DOMAIN_NAME> -username <OBJECTSERVER USER>
B. itnm_start nco
C. nco_sql -domain <OBJECTSERVER_NAME> -username <OBJECTSERVER_USER>
D. ncp_sql -server <OBJECTSERVER_NAME>-username <OBJECTSERVER_USER>
正解：A
質問 9：
Given command line access to an IBM Tivoli Network Manager IP Edition V3.9 UNIX server, running which binary ensures the changes made to omni .dat are synchronized to
interfaces <arch>?
A. ncojgen
B. nco dbinit
C. ncp_oql
D. nco_sql
正解：A
Which OQL query determines the SNMP access status of seeded devices?
A. select" from translations.ipToBaseName;
B. select* from Details.returns;
C. select* from Details despatch;
D. select "from finders.processing;
正解：B
質問 2：
What is required to install IBM Tivoli Network Manager IP Edition V3.9 on a Windows Server 2008 system?
A. The user must be configured in the IBM DB2 NCIM database
B. The user must be the administrator.
C. The tipadmin user must be created on thesystem.
D. The user must be IBM Tivoli Netcool/OMNIbus.
正解：B
質問 3：
Which two polling methods can be used for Active Polling in IBM Tivoli Network Manager IP Edition V3.9 (ITNM)? (Choose two.)
A. ICMP Polling
B. SNMP TrapReception
C. CLI-based Demand/Response Polling
D. Adaptive Polling
E. SNMP Polling
正解：A,E
質問 4：
During a deployment, a customer has identified location data that they would like added to both chassis and interface events from active (IBM Tivoli Network Manager IP Edition V3.9 (ITNM)) and passive (traps, syslog etc.) event sources.
This data has been successfully imported into the Discovery process using supported stitching techniques and appears in the topology as three custom Extralnfo fields (see below).
Ncpjnode1 has been configured to transfer this location data to a custom extended NCIM database table named locations (see exhibit below). This data is only held on EntityType 1 (chassis entities) to reduce the NCIM load.
The customer has identified three ObjectServer fields that they would like this data :o be added to for all suitable events-NmosGeography, NmosCountry, and NmosSite
Example record in Model Description of the ncim.locations table
The ModelNcimDb cofiguration has been modified to map:
Based on the scenario, what is the correct stitcher method to populate a record with Extralnfo > m_Geogrpahy location data and then update the NmosGeography ObjectServer field?
Assume that a chassis and locationData Records have been defined and the mainNodeld is set to the Entityld of the chassis of the in scope event.
Example:
Record chassis;
Record locationData.
text geog-'.
chassis = GwEntityData( mainNodeld);
A. NmosGeography = eval(text, '&8<Extralnfo->m_Geography'); GwEnrichEvent (NmosGeography);
B. NmosGeogrpahy = @chassis.locations.GEOGRAPHY; @locationData.NmosGeography = eval(text, '$NmosGeography'); GwEnrichEvent (locationData);
C. [email protected]_Geography; @locationData.NmosGeography = geog; GwEnrichEvent(locationData);
D. [email protected]; @locationData.NmosGeography = geog. GwEnrichEvent( locationData);
正解：D
質問 5：
The scope of thediscovery contains the IBM Tivoli Network Manager IP Edition V3.9 (ITNM) server and the gateway trace file shows that this is being used successfully as the correct NcpServerEntity. However, the isolated suppression method is not working. What would causethis?
A. There was no SNMP access to the ITNM server so the IP address is not known.
B. The ITNM server is not being directly polled for status.
C. The ITNM server is not connected to the rest of the topology.
D. The Root Cause Analysis plug-in has not been explicitly configured to use the ITNM server.
正解：C
質問 6：
When performing a full or partial rediscovery, what does the m_Rebuildl_ayers=1 option do in IBM Tivoli Network Manager IP Edition V3.9?
A. Disco rebuilds topology on partial but not on full discovery cycles.
B. Disco rebuilds the entire topology only on scheduled discovery cycles.
C. Disco rebuilds the entire topology on partial discovery cycles.
D. Disco does not build connectivity tables on any discovery cycles.
正解：C
質問 7：
A new poll has been defined within IBM Tivoli Network Manager IP Edition V3.9 (ITNM) and this generates an event into the ObjectServer asexpected. What is the default behavior for ITNM events within the EventGateway and root cause analysis (RCA) plug-in?
A. Events generated by the ITNM poller have to be explicitly defined to be passed to the RCA plug-in.
B. The RCA plug-in receives events directly from the poller and do not need to pass through the EventGateway.
C. Events generated by the ITNM poller will be passed to the RCA plug-in by default.
D. Events generated by the ITNM poller are not suitable for use within RCA calculations.
正解：A
質問 8：
Which command allows access to the alerts.status table from the IBM Tivoli Network Manager IP Edition V3.9 server?
A. ncp_oql -service ObjectServer -domain <ITNM_DOMAIN_NAME> -username <OBJECTSERVER USER>
B. itnm_start nco
C. nco_sql -domain <OBJECTSERVER_NAME> -username <OBJECTSERVER_USER>
D. ncp_sql -server <OBJECTSERVER_NAME>-username <OBJECTSERVER_USER>
正解：A
質問 9：
Given command line access to an IBM Tivoli Network Manager IP Edition V3.9 UNIX server, running which binary ensures the changes made to omni .dat are synchronized to
interfaces <arch>?
A. ncojgen
B. nco dbinit
C. ncp_oql
D. nco_sql
正解：A
0 お客様のコメント