1052 お客様のコメント
質問 1：
While performing some re-cabling, a NetScaler engineer noticed that a power supply unit failed on a NetScaler appliance. What should the engineer enable to receive notification of a future hardware failure?
A. SMTP
B. EdgeSight monitoring
C. SNMP
D. Health monitoring
正解：C
質問 2：
Scenario: An engineer configures two NetScaler appliances in a high availability (HA) pair. As part of a monthly health check, the engineer attempts to log on to the second node of the HA pair and is unable to access the management IP Address. The engineer logs on to the first NetScaler node and verifies that HA is working and operational. What does the engineer need to do to resolve this problem?
A. Change the NSRoot password back to default then log on to the second node.
B. Add a SNIP for the Management IP Address of the second node.
C. Create an ACL to allow access to the NSIP of the second node.
D. Ensure that HA Route Monitors have been configured for the second node.
正解：C
質問 3：
Scenario: A network engineer has created an SSL offload virtual server. The virtual server shows as a DOWN state. Which two scenarios could cause the virtual server showing as DOWN? (Choose two.)
A. The service is not bound to the virtual server.
B. The protocol should be SSL_TCP.
C. A responder policy has been bound.
D. Persistence is set to NONE.
E. No SSL certificate is bound to the virtual server.
正解：A,E
質問 4：
Scenario: A network engineer would like to prevent blacklisted remote clients from accessing NetScaler hosted application services. An IP address blacklist database is maintained by an external company and available to query over the Internet. The engineer would like to reject any connections from IP addresses that are contained in the blacklist. What could the engineer configure to achieve this goal?
A. URL transformation
B. SSL certification revocation list check
C. HTTP callout
D. SSL offload
正解：C
質問 5：
Scenario: An engineer has been asked to implement load balancing of an existing unsecured web application. The engineer needs to ensure that users will access the web application using HTTPS, but no changes can be made to the web servers hosting the web application. In order to fulfill the requirements, the engineer must create an service group and add members with port; and bind the service group to an virtual server. (Choose the correct set of options to complete the sentence.)
A. SSL; 443; SSL
B. SSL; 80; HTTP
C. HTTP; 80; SSL
D. HTTPS; 443; HTTP
正解：C
質問 6：
Scenario: Company Inc. wants to modify the HTTP
Server header so that unauthorized users and malicious code CANNOT use the header to identify the software that the HTTP server uses. Which two actions can the engineer take to meet the needs of the scenario? (Choose two.)
A. Add an HTTP Server Type on the Client Request.
B. Replace the HTTP Server Type on the Client Request.
C. Mask the HTTP Server Type on the Server Response.
D. Delete the HTTP Server Type on the Server Response.
正解：C,D
質問 7：
Scenario: A company is using Citrix NetScaler VPX for publishing internal resources using Citrix Access Gateway with Smart Access. Since the number of users has increased the company wants to migrate from Citrix NetScaler VPX to Citrix NetScaler MPX. The engineer is running a parallel installation of the Citrix NetScaler MPX and now needs to transfer the Citrix Access
Gateway Universal Licenses from a Citrix NetScaler VPX to a Citrix NetScaler MPX platform. How should the engineer transfer the Citrix Access Gateway Universal License files from the VPX to the MPX?
A. Backup the /nsconfig directory from the Citrix NetScaler VPX using SCP, restore the /nsconfig directory to the Citrix NetScaler MPX using SCP.
B. Logon to www.MyCitrix.com, return the Citrix Access Gateway Universal License file(s), reallocate the Citrix Access Gateway Universal License file using the hostname of the Citrix NetScaler MPX.
C. Download the Access Gateway Universal License file(s) from the Citrix NetScaler VPX using SCP. Upload the Access Gateway Universal License file(s) to the Citrix NetScaler MPX using SCP.
D. Logon to www.MyCitrix.com, return the Citrix Access Gateway Universal License file(s), reallocate the Citrix Access Gateway Universal License file using the MAC Address of the Citrix NetScaler MPX.
正解：B
質問 8：
A client is trying to reach a back-end server with an IP address of 10.192.31.5 given the following routing table:
Which route would the NetScaler use for this client?
A. 5
B. 1
C. 6
D. 7
正解：C
While performing some re-cabling, a NetScaler engineer noticed that a power supply unit failed on a NetScaler appliance. What should the engineer enable to receive notification of a future hardware failure?
A. SMTP
B. EdgeSight monitoring
C. SNMP
D. Health monitoring
正解：C
質問 2：
Scenario: An engineer configures two NetScaler appliances in a high availability (HA) pair. As part of a monthly health check, the engineer attempts to log on to the second node of the HA pair and is unable to access the management IP Address. The engineer logs on to the first NetScaler node and verifies that HA is working and operational. What does the engineer need to do to resolve this problem?
A. Change the NSRoot password back to default then log on to the second node.
B. Add a SNIP for the Management IP Address of the second node.
C. Create an ACL to allow access to the NSIP of the second node.
D. Ensure that HA Route Monitors have been configured for the second node.
正解：C
質問 3：
Scenario: A network engineer has created an SSL offload virtual server. The virtual server shows as a DOWN state. Which two scenarios could cause the virtual server showing as DOWN? (Choose two.)
A. The service is not bound to the virtual server.
B. The protocol should be SSL_TCP.
C. A responder policy has been bound.
D. Persistence is set to NONE.
E. No SSL certificate is bound to the virtual server.
正解：A,E
質問 4：
Scenario: A network engineer would like to prevent blacklisted remote clients from accessing NetScaler hosted application services. An IP address blacklist database is maintained by an external company and available to query over the Internet. The engineer would like to reject any connections from IP addresses that are contained in the blacklist. What could the engineer configure to achieve this goal?
A. URL transformation
B. SSL certification revocation list check
C. HTTP callout
D. SSL offload
正解：C
質問 5：
Scenario: An engineer has been asked to implement load balancing of an existing unsecured web application. The engineer needs to ensure that users will access the web application using HTTPS, but no changes can be made to the web servers hosting the web application. In order to fulfill the requirements, the engineer must create an service group and add members with port; and bind the service group to an virtual server. (Choose the correct set of options to complete the sentence.)
A. SSL; 443; SSL
B. SSL; 80; HTTP
C. HTTP; 80; SSL
D. HTTPS; 443; HTTP
正解：C
質問 6：
Scenario: Company Inc. wants to modify the HTTP
Server header so that unauthorized users and malicious code CANNOT use the header to identify the software that the HTTP server uses. Which two actions can the engineer take to meet the needs of the scenario? (Choose two.)
A. Add an HTTP Server Type on the Client Request.
B. Replace the HTTP Server Type on the Client Request.
C. Mask the HTTP Server Type on the Server Response.
D. Delete the HTTP Server Type on the Server Response.
正解：C,D
質問 7：
Scenario: A company is using Citrix NetScaler VPX for publishing internal resources using Citrix Access Gateway with Smart Access. Since the number of users has increased the company wants to migrate from Citrix NetScaler VPX to Citrix NetScaler MPX. The engineer is running a parallel installation of the Citrix NetScaler MPX and now needs to transfer the Citrix Access
Gateway Universal Licenses from a Citrix NetScaler VPX to a Citrix NetScaler MPX platform. How should the engineer transfer the Citrix Access Gateway Universal License files from the VPX to the MPX?
A. Backup the /nsconfig directory from the Citrix NetScaler VPX using SCP, restore the /nsconfig directory to the Citrix NetScaler MPX using SCP.
B. Logon to www.MyCitrix.com, return the Citrix Access Gateway Universal License file(s), reallocate the Citrix Access Gateway Universal License file using the hostname of the Citrix NetScaler MPX.
C. Download the Access Gateway Universal License file(s) from the Citrix NetScaler VPX using SCP. Upload the Access Gateway Universal License file(s) to the Citrix NetScaler MPX using SCP.
D. Logon to www.MyCitrix.com, return the Citrix Access Gateway Universal License file(s), reallocate the Citrix Access Gateway Universal License file using the MAC Address of the Citrix NetScaler MPX.
正解：B
質問 8：
A client is trying to reach a back-end server with an IP address of 10.192.31.5 given the following routing table:
Which route would the NetScaler use for this client?
A. 5
B. 1
C. 6
D. 7
正解：C
纱那 -
1Y0-A28問題集の内容が豊かで、真実な試験に比べて区別がなくて、信頼に値する1Y0-A28