1556 お客様のコメント
質問 1：
Six weeks after you deliver your application to production, your users report that the application slows down in the afternoon. The application is almost completely unresponsive for some users shortly after
3:00 P.M. Other users do not experience this problem until later in the day.
You do not have access to the Production environment, but you do have access to AES. The production environment has three nodes and a load balancer.
You need to resolve this issue because a new division of the organization will start using the application next month.
How do you begin your research to diagnose the cause of the reported performance issue?
A. Look at the performance profile and DB Trace output from each node.
B. Review guardrail warnings in the development environment to determine if any rules with warnings moved to production.
C. Observe the cluster and node status on the Enterprise Health Console.
D. Download the alert log file from each node and analyze the contents in the Pega Log Analyzer.
正解：C
質問 2：
Review the following classes and properties:
A field group list is defined at the MyCo-Lending-Work work pool level. The find group list name is Loans:
the specified data type is MyCo-Data-Loan.
Which three statements are valid? (Choose Three)
A. All pages within the .Loans field group must be the same class, either MyCo-Data-Loan-Aiito or MyCo-Oata-Loan Mortqage
B. The pxObjClass of any page in the .Loans field group list can be changed at nm time and does not need to be the same class.
C. An auto loan application can extend MyCo-Data-LoarvAuto without affecting a sum performed against
.Loans C). Amount
D. A rule In MyCo-DataLoan-Mortgage can only be referenced through -Loans if also defined In MyCo Data-Loan.
E. At design time, the system issues a warning since it is poor practice to define a field group with an abstract data type ctas%
正解：B,C,D
質問 3：
XYZ Corp requires employees to designate alternate operators to perform their work while they are on vacation. Work vacationing operators should be visible to alternate operators.
How do you configure the application to handle this requirement?
A. Develop an agent that transfers worklist assignments from the operator going on vacation, when that vacation starts, to the alternate operator. When vacation ends, transfer uncompleted assignments back.
B. Define a custom Access When rule named pxAssignedToMeOr Alternate. Modify the pyUserWorkList Report Definition using this rule to display every Assign-Worklist assignment within the WorkGroup.
C. Modify the user portal to only display team members for which the operator has been designated an alternate. Clicking on an operator displays that operator's worklist. Assignments are opened accordingly.
D. Add a ValueList Property to Data Admin-Operator-ID. Alternate operators add vacationing persons to their ValueList. Modify the Assign Worklist report definition to include this ValueList. Modify security accordingly to allow access.
正解：C
質問 4：
What are two valid reasons for defining a case type within a case type-specific ruleset? (Choose
A. The ruleset can be added to the ruleset stack for multiple applications.
B. Case-specific rulesets make it easier to rebase ruleset versions.
C. Each branch ruleset can be associated to case-specific user stories.
D. The case type might be converted to a component application in the future.
正解：B,D
質問 5：
Select two ways for queuing an item for a queue processor. (Choose Two.)
A. Use the Queue for -agent method
B. Use Utility smart shape
C. Use Run in Background smart shape
D. Use the Queue-for-processing method
正解：C,D
質問 6：
You oversee a medium-size development team. Some of the team members and new to Pega and are working on features in a separate branch.
What are two ways you can ensure that the rules the team creates adhere to best practices? (Choose Two)
A. Run 1 rarer on each new rule in the branch that new team members check in to identify any failures in rule execution.
B. Review the branch quality to identify any rules with guardrail warnings.
C. Leverage the branch review feature to have senior team members validate the branch contents.
D. Use Pega Log Analyzer to locate any exceptions in the branch associated with the new team members.
正解：B,C
質問 7：
You are managing distributed, geographically dispersed, development teams A, B and C.
Team A is ready to merge changes into their development environment to make available changes to Team B's Team C's.
To ensure all development teams are working with the latest version of shared rule base, select and move all of the following tasks to the tasks List Order column and place them in the correct order.
正解：
Explanation
Team A publishes branch,
Automation server merges three branch,
Team B and C rebase the application
Six weeks after you deliver your application to production, your users report that the application slows down in the afternoon. The application is almost completely unresponsive for some users shortly after
3:00 P.M. Other users do not experience this problem until later in the day.
You do not have access to the Production environment, but you do have access to AES. The production environment has three nodes and a load balancer.
You need to resolve this issue because a new division of the organization will start using the application next month.
How do you begin your research to diagnose the cause of the reported performance issue?
A. Look at the performance profile and DB Trace output from each node.
B. Review guardrail warnings in the development environment to determine if any rules with warnings moved to production.
C. Observe the cluster and node status on the Enterprise Health Console.
D. Download the alert log file from each node and analyze the contents in the Pega Log Analyzer.
正解：C
質問 2：
Review the following classes and properties:
A field group list is defined at the MyCo-Lending-Work work pool level. The find group list name is Loans:
the specified data type is MyCo-Data-Loan.
Which three statements are valid? (Choose Three)
A. All pages within the .Loans field group must be the same class, either MyCo-Data-Loan-Aiito or MyCo-Oata-Loan Mortqage
B. The pxObjClass of any page in the .Loans field group list can be changed at nm time and does not need to be the same class.
C. An auto loan application can extend MyCo-Data-LoarvAuto without affecting a sum performed against
.Loans C). Amount
D. A rule In MyCo-DataLoan-Mortgage can only be referenced through -Loans if also defined In MyCo Data-Loan.
E. At design time, the system issues a warning since it is poor practice to define a field group with an abstract data type ctas%
正解：B,C,D
質問 3：
XYZ Corp requires employees to designate alternate operators to perform their work while they are on vacation. Work vacationing operators should be visible to alternate operators.
How do you configure the application to handle this requirement?
A. Develop an agent that transfers worklist assignments from the operator going on vacation, when that vacation starts, to the alternate operator. When vacation ends, transfer uncompleted assignments back.
B. Define a custom Access When rule named pxAssignedToMeOr Alternate. Modify the pyUserWorkList Report Definition using this rule to display every Assign-Worklist assignment within the WorkGroup.
C. Modify the user portal to only display team members for which the operator has been designated an alternate. Clicking on an operator displays that operator's worklist. Assignments are opened accordingly.
D. Add a ValueList Property to Data Admin-Operator-ID. Alternate operators add vacationing persons to their ValueList. Modify the Assign Worklist report definition to include this ValueList. Modify security accordingly to allow access.
正解：C
質問 4：
What are two valid reasons for defining a case type within a case type-specific ruleset? (Choose
A. The ruleset can be added to the ruleset stack for multiple applications.
B. Case-specific rulesets make it easier to rebase ruleset versions.
C. Each branch ruleset can be associated to case-specific user stories.
D. The case type might be converted to a component application in the future.
正解：B,D
質問 5：
Select two ways for queuing an item for a queue processor. (Choose Two.)
A. Use the Queue for -agent method
B. Use Utility smart shape
C. Use Run in Background smart shape
D. Use the Queue-for-processing method
正解：C,D
質問 6：
You oversee a medium-size development team. Some of the team members and new to Pega and are working on features in a separate branch.
What are two ways you can ensure that the rules the team creates adhere to best practices? (Choose Two)
A. Run 1 rarer on each new rule in the branch that new team members check in to identify any failures in rule execution.
B. Review the branch quality to identify any rules with guardrail warnings.
C. Leverage the branch review feature to have senior team members validate the branch contents.
D. Use Pega Log Analyzer to locate any exceptions in the branch associated with the new team members.
正解：B,C
質問 7：
You are managing distributed, geographically dispersed, development teams A, B and C.
Team A is ready to merge changes into their development environment to make available changes to Team B's Team C's.
To ensure all development teams are working with the latest version of shared rule base, select and move all of the following tasks to the tasks List Order column and place them in the correct order.
正解：
Explanation
Team A publishes branch,
Automation server merges three branch,
Team B and C rebase the application
本多** -
PegasystemsのこのPEGAPCLSA86V1問題集の問題を暗記して試験に受けてみて、試験の内容がほぼ問題集の内容に一致していてびっくりしました。スムーズにかけたし、合格することもできました。