質問 1:
Which business processes are affected by setting in the order type-dependent parameters?
A. Intiate quality inspections.
B. Select master data.
C. Define integration to cost accounting.
D. Implement engineering changes.
正解:B,C
質問 2:
You set up a material as a phantom assembly by entering the special procurement key in the material master.
How can you switch off the phantom assembly in a specific bill of material (BOM)?
A. Change the special procurement key of the phantom assembly in the BOM.
B. Change the explosion type of the phantom assembly in the BOM.
C. Change the phantom item indicator for the phantom assembly in the BOM.
D. Change the item category of the phantom assembly in the BOM.
正解:B
質問 3:
If the stock level drops below the reorder stock in reorder point planning, what logic would the system use to trigger procurement?
A. Fill up to the maximum stock level
B. Fill up to the reorder stock level
C. Fill up based on the lot size procedure
D. Fill up to the safety stoc level
正解:C
質問 4:
Which alternative item strategies are available in bills of materials (BOM) in SAP S/4HANA?
A. First in first out (FIFO)
B. By usage probability
C. Simultaneous
D. 100% check
正解:B,D
質問 5:
How can you achive a feasible production plan in case of capacity constraints?
A. Adjust the available capacity.
B. Select an alternative mode on a resource.
C. Reduce the planning window
D. Execute an infinite production planning run
E. Form optimum sequence to reduce setup times
正解:A,B,E
質問 6:
You use planning strategy Finite Scheduling - with Reverse adn want to allow scheduling in the past. How can you achive this?
A. Specify a positive offset time in the strategy profile.
B. Specify a positive planning horizon in the strategy profile.
C. Specify a negative offset time in the strategy profile.
D. Specify a negative lanning horizon in the strategy profile.
正解:C
質問 7:
You are working with planning strategy 40 (Planning-with-final assembly) When does consuption of planned independent requirements take places?
A. When you create a planned order
B. When you deliver a sales order
C. When the MRP result are saved
D. When you create a sales order
正解:D
質問 8:
Which of the following is valid sequence of the main activities in production order processing?
A. Creation, printing, release, goods issue, confirmation, goods receipt
B. Creation, release, settlement, goods issue, confirmation, goods receipt
C. Creation, release, printing, goods issue, confirmation, goods receipt
D. Creation, availability check, release, material widrawal, confirmation
正解:C,D
一年間無料で問題集をアップデートするサービスを提供します。
弊社の商品をご購入になったことがあるお客様に一年間の無料更新サービスを提供いたします。弊社は毎日問題集が更新されたかどうかを確認しますから、もし更新されたら、弊社は直ちに最新版のC_TS422_2021問題集をお客様のメールアドレスに送信いたします。ですから、試験に関連する情報が変わったら、あなたがすぐに知ることができます。弊社はお客様がいつでも最新版のSAP C_TS422_2021学習教材を持っていることを保証します。
弊社のC_TS422_2021問題集のメリット
Pass4Testの人気IT認定試験問題集は的中率が高くて、100%試験に合格できるように作成されたものです。Pass4Testの問題集はIT専門家が長年の経験を活かして最新のシラバスに従って研究し出した学習教材です。弊社のC_TS422_2021問題集は100%の正確率を持っています。弊社のC_TS422_2021問題集は多肢選択問題、単一選択問題、ドラッグ とドロップ問題及び穴埋め問題のいくつかの種類を提供しております。
Pass4Testは効率が良い受験法を教えてさしあげます。弊社のC_TS422_2021問題集は精確に実際試験の範囲を絞ります。弊社のC_TS422_2021問題集を利用すると、試験の準備をするときに時間をたくさん節約することができます。弊社の問題集によって、あなたは試験に関連する専門知識をよく習得し、自分の能力を高めることができます。それだけでなく、弊社のC_TS422_2021問題集はあなたがC_TS422_2021認定試験に一発合格できることを保証いたします。
行き届いたサービス、お客様の立場からの思いやり、高品質の学習教材を提供するのは弊社の目標です。 お客様がご購入の前に、無料で弊社のC_TS422_2021試験「SAP Certified Application Associate - SAP S/4HANA Production Planning and Manufacturing 2021」のサンプルをダウンロードして試用することができます。PDF版とソフト版の両方がありますから、あなたに最大の便利を捧げます。それに、C_TS422_2021試験問題は最新の試験情報に基づいて定期的にアップデートされています。
SAP C_TS422_2021 認定試験の出題範囲:
トピック | 出題範囲 |
---|
トピック 1 | - Describe the SAP HANA database concept and new user experience with SAP Fiori
- Capacity Planning in SAP S
- 4HANA
|
トピック 2 | - Identify repetitive manufacturing specific master data
- Identify features for Good Manufacturing Practices (GMP)
|
トピック 3 | - Outline both motivation and background of SAP S
- 4HANA
- Select and apply planning strategies, use the planning table
|
トピック 4 | - Determine master data objects for process orders
- Introduction to SAP S
- 4HANA Supply Chain Planning
|
トピック 5 | - Explain and compare the different production methods in make-to-order
- Outline production planning components and functions
|
トピック 6 | - Identify and explain production relevant master data
- Configure availability check for components
|
トピック 7 | - Determine BOM item category, describe order status management and set user statuses
- Material Requirements Planning in SAP S
- 4HANA
|
トピック 8 | - Set up an order type, apply material staging and confirmation
- Explain line load planning and confirmation
|
トピック 9 | - Characterize process order elements and process order processing
- Outline the basics and master data of advanced planning
|
参照:https://training.sap.com/certification/c_ts422_2021-sap-certified-application-associate---sap-s4ahana-production-planning-and-manufacturing-g/
弊社のSAP Certified Application Associate問題集を利用すれば必ず試験に合格できます。
Pass4TestのSAP C_TS422_2021問題集はIT認定試験に関連する豊富な経験を持っているIT専門家によって研究された最新バージョンの試験参考書です。SAP C_TS422_2021問題集は最新のSAP C_TS422_2021試験内容を含んでいてヒット率がとても高いです。Pass4TestのSAP C_TS422_2021問題集を真剣に勉強する限り、簡単に試験に合格することができます。弊社の問題集は100%の合格率を持っています。これは数え切れない受験者の皆さんに証明されたことです。100%一発合格!失敗一回なら、全額返金を約束します!
弊社は無料でSAP Certified Application Associate試験のDEMOを提供します。
Pass4Testの試験問題集はPDF版とソフト版があります。PDF版のC_TS422_2021問題集は印刷されることができ、ソフト版のC_TS422_2021問題集はどのパソコンでも使われることもできます。両方の問題集のデモを無料で提供し、ご購入の前に問題集をよく理解することができます。
簡単で便利な購入方法:ご購入を完了するためにわずか2つのステップが必要です。弊社は最速のスピードでお客様のメールボックスに製品をお送りします。あなたはただ電子メールの添付ファイルをダウンロードする必要があります。
領収書について:社名入りの領収書が必要な場合には、メールで社名に記入して頂き送信してください。弊社はPDF版の領収書を提供いたします。
Aizawa -
C_TS422_2021試験の内容を問題集一つでカバーし実戦力を養うことのできる問題集です。