977 お客様のコメント
質問 1：
A tape library had the robot firmware upgraded and now the robot is reading the barcodes with additional characters.
How should an administrator enable NetBackup 7.7 to use the same characters as before the firmware upgrade occurred?
A. update Media settings
B. update the Barcode Rules setting
C. update Device mappings
D. update the Media ID Generation setting
正解：D
質問 2：
A NetBackup Master Server has commenced writing four long-running duplication jobs on an
AdvancedDisk disk pool. The value of Maximum concurrent jobs for the storage unit and Limit 1/0 streams for the disk pool are both set to 4.
There are 35 jobs queued on the Master Server that require this disk pool:
5 replication jobs with priority 9999
1 0 backup jobs with priority 999
2 0 duplication jobs with priority 99
Two restore jobs that require this disk pool are then submitted with default priority.
Which job type goes active next?
A. Restore
B. Duplication
C. Replication
D. Backup
正解：A
質問 3：
Which two actions should an administrator take to allow NetBackup to manage the allocation of volumes to volume pools? (Select two.)
A. assign volumes to all volume pools as required in the environment
B. assign volumes to NetBackup and DataStore volume pools so NetBackup will move the assigned volumes to other pools as volumes are needed
C. define a scratch pool with assigned volumes so NetBackup will move the assigned volumes to other pools as volumes are needed
D. create volume pools as required, but refrain from adding volumes to the pools
E. define a scratch pool and add all of the volumes to it so NetBackup will move volumes to the other pools as volumes are needed
正解：D,E
質問 4：
Which command should an administrator use to determine which storage lifecycle policy's image copies are incomplete?
A. nbstlutil
B. nbreplicate
C. bpimage
D. nbstl
正解：C
質問 5：
An administrator runs the following command on the Master Server to test connectivity to a client:
bptestbpcd -client clientA
The administrator receives the following message:
<16> bptestbpcd main: Function ConnectToBPCD (clientA) failed: 25 cannot connect on socket
Which two reasons may cause the error message? (Select two.)
A. the Master Server is unknown to the client
B. an incorrect entry for the client in the Master Server's hosts file
C. vnetd is stopped on the Master Server
D. the NetBackup processes on the client are stopped
E. an incorrect entry for the Master Server in the client's hosts file
正解：B,D
質問 6：
In the NetBackup Administration Console or Java console, how should an administrator change a disk pool to down status?
A. Credentials> Storage Servers> right-click and select Down Disk Pool
B. Devices> Disk Pools> right-click and select Down Disk Pool
C. Media and Device Management> Devices> Disk Pools > right-click and select Down Disk Pool
D. Device Monitor> Disk Pools > right-click and select Down Disk Pool
正解：D
A tape library had the robot firmware upgraded and now the robot is reading the barcodes with additional characters.
How should an administrator enable NetBackup 7.7 to use the same characters as before the firmware upgrade occurred?
A. update Media settings
B. update the Barcode Rules setting
C. update Device mappings
D. update the Media ID Generation setting
正解：D
質問 2：
A NetBackup Master Server has commenced writing four long-running duplication jobs on an
AdvancedDisk disk pool. The value of Maximum concurrent jobs for the storage unit and Limit 1/0 streams for the disk pool are both set to 4.
There are 35 jobs queued on the Master Server that require this disk pool:
5 replication jobs with priority 9999
1 0 backup jobs with priority 999
2 0 duplication jobs with priority 99
Two restore jobs that require this disk pool are then submitted with default priority.
Which job type goes active next?
A. Restore
B. Duplication
C. Replication
D. Backup
正解：A
質問 3：
Which two actions should an administrator take to allow NetBackup to manage the allocation of volumes to volume pools? (Select two.)
A. assign volumes to all volume pools as required in the environment
B. assign volumes to NetBackup and DataStore volume pools so NetBackup will move the assigned volumes to other pools as volumes are needed
C. define a scratch pool with assigned volumes so NetBackup will move the assigned volumes to other pools as volumes are needed
D. create volume pools as required, but refrain from adding volumes to the pools
E. define a scratch pool and add all of the volumes to it so NetBackup will move volumes to the other pools as volumes are needed
正解：D,E
質問 4：
Which command should an administrator use to determine which storage lifecycle policy's image copies are incomplete?
A. nbstlutil
B. nbreplicate
C. bpimage
D. nbstl
正解：C
質問 5：
An administrator runs the following command on the Master Server to test connectivity to a client:
bptestbpcd -client clientA
The administrator receives the following message:
<16> bptestbpcd main: Function ConnectToBPCD (clientA) failed: 25 cannot connect on socket
Which two reasons may cause the error message? (Select two.)
A. the Master Server is unknown to the client
B. an incorrect entry for the client in the Master Server's hosts file
C. vnetd is stopped on the Master Server
D. the NetBackup processes on the client are stopped
E. an incorrect entry for the Master Server in the client's hosts file
正解：B,D
質問 6：
In the NetBackup Administration Console or Java console, how should an administrator change a disk pool to down status?
A. Credentials> Storage Servers> right-click and select Down Disk Pool
B. Devices> Disk Pools> right-click and select Down Disk Pool
C. Media and Device Management> Devices> Disk Pools > right-click and select Down Disk Pool
D. Device Monitor> Disk Pools > right-click and select Down Disk Pool
正解：D
Nishida -
身近なところから順番にVCS-274学習できるようになっている点も良い点です。