1164 お客様のコメント
質問 1：
A new FCoE solution is experiencing random connectivity issues between many servers and their storage. Which of the following should the SAN administrator check FIRST?
A. Inspect the cables and replace as necessary
B. Replace the forwarder with a director and FCoE line module
C. Implement a router to bridge between FCoE and FC devices
D. Configure the forwarder to NPIV mode of operations
正解：A
質問 2：
A storage administrator notices that a server is intermittently losing access to its storage over a single path. Which of the following statistics on an FC switch would have a high count value in this situation?
A. Rx error count
B. Core PID
C. Loss of signal
D. dB levels
正解：C
質問 3：
To prevent injury during rack loading which of the following should be implemented?
A. Non-powered tools
B. Proper lifting techniques
C. Proper device cabling
D. Antistatic device deployment
正解：B
質問 4：
Incoming data is detected as duplicate and is removed, allowing reduction of storage consumption. This is called which of the following?
A. Post-process deduplication
B. In-line deduplication
C. Hierarchical data storage
D. Single instance storage
正解：B
質問 5：
After a server reboot, the server no longer can connect to the iSCSI network. The switch port shows no connection and moving the cable to a new port did not produce a positive result. Which of the following would be the BEST next step?
A. Disable the firewall
B. Replace the NIC
C. Replace the FC cable
D. Disable and re-enable the switch configuration
正解：B
A new FCoE solution is experiencing random connectivity issues between many servers and their storage. Which of the following should the SAN administrator check FIRST?
A. Inspect the cables and replace as necessary
B. Replace the forwarder with a director and FCoE line module
C. Implement a router to bridge between FCoE and FC devices
D. Configure the forwarder to NPIV mode of operations
正解：A
質問 2：
A storage administrator notices that a server is intermittently losing access to its storage over a single path. Which of the following statistics on an FC switch would have a high count value in this situation?
A. Rx error count
B. Core PID
C. Loss of signal
D. dB levels
正解：C
質問 3：
To prevent injury during rack loading which of the following should be implemented?
A. Non-powered tools
B. Proper lifting techniques
C. Proper device cabling
D. Antistatic device deployment
正解：B
質問 4：
Incoming data is detected as duplicate and is removed, allowing reduction of storage consumption. This is called which of the following?
A. Post-process deduplication
B. In-line deduplication
C. Hierarchical data storage
D. Single instance storage
正解：B
質問 5：
After a server reboot, the server no longer can connect to the iSCSI network. The switch port shows no connection and moving the cable to a new port did not produce a positive result. Which of the following would be the BEST next step?
A. Disable the firewall
B. Replace the NIC
C. Replace the FC cable
D. Disable and re-enable the switch configuration
正解：B
秋元** -
他社と比べると、たいへんよくなった受験対策問題集です。
他の方のレビューにもありますが、非常によくなっています。
この本でほぼ確実にSGO-001試験に合格できると思います。