915 お客様のコメント
質問 1：
A customer has a Communication Server (CS) 1000 Rls. 7x Co-Resident system, and needs to access the Call Server Overlay Shell to use the Call Server Overlay commands.
Which two commands are used to access the Call Server Shell? (Choose two)
A. cspdt
B. csconsole
C. csaccess
D. cslogin
正解：A,D
解説: (Pass4Test メンバーにのみ表示されます)
質問 2：
A customer has a several analog telephones running of a Flexible Analog Line Card (FALC) in an IPMG. Users are able to receive calls on the telephone and have a conversation, however they cannot initiate a call as there is no dial tone.
What should be checked first?
A. All tone and digit switch loops (TDS), IPMG registration status
B. Physical connections, dsp resource availability, and tone loops
C. Tone and digital loops (TDS), extended tone detector (XTD)
D. All XTD and conference loops
正解：A
質問 3：
A customer has completed installing and configuring a new CPMG Co-Resident Platform. The Gateway controller has rebooted and the customer has verified the LED display shows the loop and shelf of the media gateway.
The customer is satisfied the gateway controller has successfully registered to the Call Server. The customer logs into the system Manager and accesses the UCM Element list and the Gateway controller does not appear in the Element List with the other registered elements in the security domain.
What is the recommended course of action for the customer to ensure the Gateway Controller appears in the Element List?
A. Log into the system and access Overlay 117 and enter register ucmsecure device.
B. Log into the Gateway controller card using CLI and enter registerSecDomain.
C. Log into the Gateway controller card using CLI and enter statSecDomain.
D. Log into the Gateway controller card using CLI and enter joinSecDomain.
正解：D
質問 4：
A customer has completed the security configuration for the security servers in the Avaya Aura integrated system. The System is using Avaya Aura System Manager as the Primary Security Server. The Customer is accessing the Base manager of each Server from the Element list to perform base configuration changes. Aaa Base Managers are accessible except the primary server; When Clicking on the Primary Server, the customer is taken to the System Manager Dashboard page.
What is the recommended course of action for the customer?
A. On the system Manager Console, access UCM Roles to change access Privileges.
B. No action is required; System Manager does not have an associated base Manager.
C. Log into the System Manager command to access Base Manager.
D. Log into Base Manager of the Primary Security server using local-login to access the Base Manager.
正解：B
質問 5：
A customer wants to build a new Ip node on their Communication Server (CS) 1000E system with three Signaling Servers. This node will support virtual trunks, IP media services, TPS and personnel directories. A technician logs into Elements manager to complete the configuration, after creating and saving the node configuration, the transfer now option chosen, then the servers are selected, the start sync is selected followed by restart application.
What is expected outcome from the system?
A. The node file will be transferred from Call Servers to the Signaling servers, and the INI files will be transferred from the Call Servers to the selected servers.
B. The node file will be transferred from Signaling Servers to the Call Server, and the INI files will be transferred from Call Servers to the Signaling servers.
C. The node will be transferred from Element manager to the call server, and INI files will be transferred from Element manager to Call Server.
D. The node file will be transferred from Signaling Servers to the call servers, and INI files will be transferred from the call server to the selected servers.
正解：A
質問 6：
A customer with a Communication Server (CS) 1000E Rls..5.5 with two IPMGs is upgrading their system to release 7 x. The Upgrade system will have two IP media Gateways.
Which two statements are true regarding DSP resources for the IP Media gateways in the Upgrade System? (Choose two)
A. DSP resources are localized to particular IPMG where the DSP resource is locted.
B. DSP resources are required for TDM to local calls
C. DSP resources are considered system resources and are not localized.
D. DSP resources are no longer required for inter-IOMG calls.
正解：A,C
A customer has a Communication Server (CS) 1000 Rls. 7x Co-Resident system, and needs to access the Call Server Overlay Shell to use the Call Server Overlay commands.
Which two commands are used to access the Call Server Shell? (Choose two)
A. cspdt
B. csconsole
C. csaccess
D. cslogin
正解：A,D
解説: (Pass4Test メンバーにのみ表示されます)
質問 2：
A customer has a several analog telephones running of a Flexible Analog Line Card (FALC) in an IPMG. Users are able to receive calls on the telephone and have a conversation, however they cannot initiate a call as there is no dial tone.
What should be checked first?
A. All tone and digit switch loops (TDS), IPMG registration status
B. Physical connections, dsp resource availability, and tone loops
C. Tone and digital loops (TDS), extended tone detector (XTD)
D. All XTD and conference loops
正解：A
質問 3：
A customer has completed installing and configuring a new CPMG Co-Resident Platform. The Gateway controller has rebooted and the customer has verified the LED display shows the loop and shelf of the media gateway.
The customer is satisfied the gateway controller has successfully registered to the Call Server. The customer logs into the system Manager and accesses the UCM Element list and the Gateway controller does not appear in the Element List with the other registered elements in the security domain.
What is the recommended course of action for the customer to ensure the Gateway Controller appears in the Element List?
A. Log into the system and access Overlay 117 and enter register ucmsecure device.
B. Log into the Gateway controller card using CLI and enter registerSecDomain.
C. Log into the Gateway controller card using CLI and enter statSecDomain.
D. Log into the Gateway controller card using CLI and enter joinSecDomain.
正解：D
質問 4：
A customer has completed the security configuration for the security servers in the Avaya Aura integrated system. The System is using Avaya Aura System Manager as the Primary Security Server. The Customer is accessing the Base manager of each Server from the Element list to perform base configuration changes. Aaa Base Managers are accessible except the primary server; When Clicking on the Primary Server, the customer is taken to the System Manager Dashboard page.
What is the recommended course of action for the customer?
A. On the system Manager Console, access UCM Roles to change access Privileges.
B. No action is required; System Manager does not have an associated base Manager.
C. Log into the System Manager command to access Base Manager.
D. Log into Base Manager of the Primary Security server using local-login to access the Base Manager.
正解：B
質問 5：
A customer wants to build a new Ip node on their Communication Server (CS) 1000E system with three Signaling Servers. This node will support virtual trunks, IP media services, TPS and personnel directories. A technician logs into Elements manager to complete the configuration, after creating and saving the node configuration, the transfer now option chosen, then the servers are selected, the start sync is selected followed by restart application.
What is expected outcome from the system?
A. The node file will be transferred from Call Servers to the Signaling servers, and the INI files will be transferred from the Call Servers to the selected servers.
B. The node file will be transferred from Signaling Servers to the Call Server, and the INI files will be transferred from Call Servers to the Signaling servers.
C. The node will be transferred from Element manager to the call server, and INI files will be transferred from Element manager to Call Server.
D. The node file will be transferred from Signaling Servers to the call servers, and INI files will be transferred from the call server to the selected servers.
正解：A
質問 6：
A customer with a Communication Server (CS) 1000E Rls..5.5 with two IPMGs is upgrading their system to release 7 x. The Upgrade system will have two IP media Gateways.
Which two statements are true regarding DSP resources for the IP Media gateways in the Upgrade System? (Choose two)
A. DSP resources are localized to particular IPMG where the DSP resource is locted.
B. DSP resources are required for TDM to local calls
C. DSP resources are considered system resources and are not localized.
D. DSP resources are no longer required for inter-IOMG calls.
正解：A,C
冈本** -
一からの学習にも試験直前の学習にも使える7003.1問題集だと思う。初学者も再挑戦者も効率的に学習を進められます！