1171 お客様のコメント
質問 1：
You plan to use the raidcom command to create new LDEVs in an HUS VM. Which two actions are required before you use this command? (Choose two.)
A. Install the TrueCopy license.
B. Install RAID Manager/CCI in client host.
C. Create a RAID Manager/CCI configuration file.
D. Create a command device LDEV.
正解：B,C
質問 2：
You have replaced a part on an HUS VM. What are three mandatory steps to complete your maintenance task? (Choose three.)
A. Complete the "Last maintenance" form inside the DKC door.
B. Verify the machine status using the maintenance screen.
C. Reboot the SVP to renew the configuration.
D. Complete the corresponding SIM(s).
E. Set the SVP application back to View Mode.
正解：B,D,E
質問 3：
During the initial setup of an HUS VM, the subscription level for the HDP pool was set to 100%. Now the customer would like to allow overprovisioning up to 120% on the existing HDP pool. What would you tell the customer?
A. It is possible to overprovision the existing HDP pool.
B. Overprovisioning will be available only for newly created DP-Vols.
C. Overprovisioning will be possible only after the HDP pool expansion.
D. It is not possible to overprovision the existing HDP pool.
正解：A
質問 4：
A customer has an HUS VM and will create a Hitachi Dynamic Tiering (HDT) pool using Storage Navigator. What are two parameters when selecting the HDT pool-Vols manually? (Choose two.)
A. Drive Type/RPM
B. Total Capacity
C. RAID Level
D. Performance
正解：A,C
質問 5：
You have just installed Hitachi Dynamic Link Manager (HDLM) on a Solaris server. What is the purpose of running the "dlnkmgr view -sys" command?
A. It displays the primary path.
B. It displays the alternate path.
C. It displays the configuration.
D. It configures the alternate path.
正解：C
質問 6：
You must perform an initial setup procedure on an HUS VM that was used for a proof of concept. Which statement is correct?
A. The user data must always be shredded.
B. License keys must be installed.
C. Emergency license keys are required.
D. The HDD format is not required.
正解：B
質問 7：
You are using Hitachi Dynamic Tiering (HDT) on an HUS VM. What does HDT monitor to determine if reallocation is needed?
A. Page
B. DP-Vol
C. Parity Group
D. Allocated Capacity
正解：A
You plan to use the raidcom command to create new LDEVs in an HUS VM. Which two actions are required before you use this command? (Choose two.)
A. Install the TrueCopy license.
B. Install RAID Manager/CCI in client host.
C. Create a RAID Manager/CCI configuration file.
D. Create a command device LDEV.
正解：B,C
質問 2：
You have replaced a part on an HUS VM. What are three mandatory steps to complete your maintenance task? (Choose three.)
A. Complete the "Last maintenance" form inside the DKC door.
B. Verify the machine status using the maintenance screen.
C. Reboot the SVP to renew the configuration.
D. Complete the corresponding SIM(s).
E. Set the SVP application back to View Mode.
正解：B,D,E
質問 3：
During the initial setup of an HUS VM, the subscription level for the HDP pool was set to 100%. Now the customer would like to allow overprovisioning up to 120% on the existing HDP pool. What would you tell the customer?
A. It is possible to overprovision the existing HDP pool.
B. Overprovisioning will be available only for newly created DP-Vols.
C. Overprovisioning will be possible only after the HDP pool expansion.
D. It is not possible to overprovision the existing HDP pool.
正解：A
質問 4：
A customer has an HUS VM and will create a Hitachi Dynamic Tiering (HDT) pool using Storage Navigator. What are two parameters when selecting the HDT pool-Vols manually? (Choose two.)
A. Drive Type/RPM
B. Total Capacity
C. RAID Level
D. Performance
正解：A,C
質問 5：
You have just installed Hitachi Dynamic Link Manager (HDLM) on a Solaris server. What is the purpose of running the "dlnkmgr view -sys" command?
A. It displays the primary path.
B. It displays the alternate path.
C. It displays the configuration.
D. It configures the alternate path.
正解：C
質問 6：
You must perform an initial setup procedure on an HUS VM that was used for a proof of concept. Which statement is correct?
A. The user data must always be shredded.
B. License keys must be installed.
C. Emergency license keys are required.
D. The HDD format is not required.
正解：B
質問 7：
You are using Hitachi Dynamic Tiering (HDT) on an HUS VM. What does HDT monitor to determine if reallocation is needed?
A. Page
B. DP-Vol
C. Parity Group
D. Allocated Capacity
正解：A
吉田** -
HH0-240問題集一つで万全の試験対策、素敵です。無事試験にごうかくしました。ありがとねPass4Testさん