最新なCitrix 1Y0-351問題集（290題）、真実試験の問題を全部にカバー！

質問 1：
Scenario: A NetScaler Engineer has configured a virtual server as follows:
set lb vserver web_vserver -redirectURL http://www.external.hosting.com -backupVServer maint_vserver The virtual server web_vserver is marked as DOWN; maint_vserver is marked as UP.
The following request is sent to the web_vserver:
GET /path/query HTTP/1.1
What would happen to this request?
A. Redirected to http://www.external.hosting.com/path/query
B. Redirected to http://www.external.hosting.com
C. Forwarded to the backup server, ignoring the query
D. Forwarded to the backup server, preserving the query
正解：D

質問 2：
Scenario: A NetScaler Engineer is configuring a NetScaler that has three interfaces. The first interface is connected to the internal network, the second interface is connected to the DMZ1-network, and the third interface is connected to the DMZ2-network.
DMZ1 and DMZ2 networks are behind different firewalls, and both firewalls are sending traffic through network address translation (NAT) to the DMZ networks.
The default route is to the gateway on the DMZ1-network.
DMZ1: 10.10.10.0/24 (Gateway: 10.10.10.1)
DMZ2: 10.20.20.0/24 (Gateway: 10.20.20.1)
Internal: 192.168.0.0/24 (Gateway: 192.168.0.1)
Internet traffic reaches the virtual servers located in DMZ1 but NOT the virtual servers located in DMZ2.
Which policy-based route (PBR) would resolve the issue?
A. add ns pbr PBR1 ALLOW -srcIP = 10.20.20.0-10.20.20.255 -destIP != 10.20.20.0-
1 0.20.20.255 -nextHop 10.10.10.1 -priority 10
B. add ns pbr PBR1 ALLOW -srcIP = 10.20.20.0-10.20.20.255 -destIP != 10.20.20.0-
1 0.20.20.255 -nextHop 10.20.20.1 -priority 10
C. add ns pbr PBR1 ALLOW -srcIP != 10.20.20.0-10.20.20.255 -destIP != 10.20.20.0-
1 0.20.20.255 -nextHop 10.10.10.1 -priority 10
D. add ns pbr PBR1 ALLOW -srcIP != 10.20.20.0-10.20.20.255 -destIP = 10.20.20.0-
1 0.20.20.255 -nextHop 10.20.20.1 -priority 10
正解：B

質問 3：
A network engineer selected the option on a SSL certificate to provide notification upon expiration of the certificate; however when a certificate expires, NO notification is sent to the engineer. Which step could the engineer take to enable notification?
A. Configure SNMP.
B. Ensure that the certificate is linked to a Root certificate.
C. Enable the SSL offload feature.
D. Create a SSL policy.
正解：A

質問 4：
A network engineer needs to prevent too many simultaneous HTTP requests that can cause a Denial Of Service (DDoS). What could the engineer enable to prevent too many simultaneous HTTP requests?
A. Rate Limiting
B. Authorization Policy
C. SureConnect
D. Priority Queuing
正解：A

質問 5：
What does the TCP Buffering feature on the NetScaler accomplish?
A. It buffers incoming client connections on the NetScaler.
B. It optimizes the client and server TCP window size.
C. It offloads the server response to the NetScaler before delivering it to the client.
D. It enables the TCP options field syn-cookie.
正解：C

質問 6：
A network engineer has configured two NetScaler MPX appliances as a high availability (HA) pair.
What can the engineer configure to prevent failover if only a single interface fails?
A. PBR
B. VMAC
C. SNMP
D. FIS
正解：D

質問 7：
Which load-balancing method is used in connection mirroring and firewall load balancing?
A. Call ID Hash
B. Destination IP Hash
C. URL Hash
D. Source IP Soure Port Hash
正解：D

質問 8：
Which connection state is included in the Current Server Connections parameter, but not affected by Max Clients?
A. Open Established
B. Listen
C. Open
D. Closing
正解：D

質問 9：
Which service setting would a NetScaler Engineer use in the command-line interface to limit connections to server resources?
A. -monThreshold
B. -maxReq
C. -maxBandwidth
D. -maxClient
正解：D