1021 お客様のコメント
クリック」
質問 1：
An administrator has received reports of intermittent connectivity between virtual machines on an NSX network. The network team has verified that all physical network devices have been set to 1600 MTU.
What other configuration could cause this issue?
A. An MTU value of 1500 on the distributed firewall
B. An MTU value of 1500 on the logical load balancer
C. An MTU value of 1500 on the vDS Switch
D. An MTU value of 1500 on the logical router
正解：C
質問 2：
-- Exhibit- -- Exhibit -
The diagrams show two possible physical network architectures. Each architecture provides a means in dealing with the pictured failure.
Which architecture provides the highest degree of connectivity in the event of the pictured failure?
A. Diagram B's architecture will provide the highest percentage of connectivity in times of failure.
B. Both designs will provide the same percentage ofconnectivityin times of failure.
C. Diagram A's architecture will provide the highest percentage of connectivity in times of failure.
D. Neither design is properly architected to work around the displayed failure.
正解：A
質問 3：
Which two statements describe the benefits provided by firewall services deployed by NSX? (Choose two.)
A. Firewall services providing edge security services uses a virtual appliance and is centrally managed.
B. Firewall services deployed using a software appliance will provide east-west traffic filtering and security.
C. Firewall services deployed using a distributed kernel module will provide east-west traffic filtering and security.
D. Firewall services providing edge security services uses a distributed kernel module.
正解：A,C
質問 4：
Which Layer 2 bridge is supported by the Distributed Router?
A. VXLAN to PVLAN bridge
B. VCD-NI to PVLAN bridge
C. VCD-NI to VLAN bridge
D. VXLAN to VLAN bridge
正解：D
質問 5：
A vSphere administrator added a new interface to a Distributed Router with a subnet of 172.16.10.0/24 and wants to make this subnet reachable to the rest of the network. How can the vSphere administrator achieve this?
A. Enable OSPF on the Distributed Router. Configure the uplink interface in the Backbone area and the new interface with the subnet 172.16.10.0/24 in a normal area.
B. Enable OSPF on the Distributed Router. Configure the uplink interface in the Backbone area and redistribute into OSPF the 172.16.10.0/24 subnet.
C. Enable OSPF on the Distributed Router. Configure the uplink interface in the Backbone area and redistribute from OSPF the 172.16.10.0/24 subnet.
D. Enable OSPF in the Distributed Router. Configure the uplink interface in the normal area and the new interface with the subnet 172.16.10.0/24 in a Backbone area.
正解：A
質問 6：
A user needs to be given the ability to make configuration changes on a specific NSX Edge device. What role and scope could be used to meet this requirement?
A. Security Administrator role and No restriction scope
B. NSX Administrator role and No restriction scope
C. Security Administrator role and Limit Access scope
D. NSX Administrator role and Limit Access scope
正解：C
質問 7：
Where does an administrator configure logging for the NSX Manager?
A. In the NSX Manager GUI
B. In the vSphere Syslog Collector
C. In the NSX Manager command line interface (CLI)
D. In the vSphere Web Client
正解：A
質問 8：
An administrator wants to perform Activity Monitoring on a large group of virtual machines in an NSX environment. How would this task be accomplished with minimal administrative effort?
A. Create a PowerCLI script to enable virtual machine data collection on each virtual machine.
B. Add the virtual machines to the pre-defined Activity Monitoring security group in Service Composer.
C. Create a security group in Service Composer and add the virtual machines to the security group.
D. Add the virtual machines to a VM folder in vCenter Server and enable data collection.
正解：B
An administrator has received reports of intermittent connectivity between virtual machines on an NSX network. The network team has verified that all physical network devices have been set to 1600 MTU.
What other configuration could cause this issue?
A. An MTU value of 1500 on the distributed firewall
B. An MTU value of 1500 on the logical load balancer
C. An MTU value of 1500 on the vDS Switch
D. An MTU value of 1500 on the logical router
正解：C
質問 2：
-- Exhibit- -- Exhibit -
The diagrams show two possible physical network architectures. Each architecture provides a means in dealing with the pictured failure.
Which architecture provides the highest degree of connectivity in the event of the pictured failure?
A. Diagram B's architecture will provide the highest percentage of connectivity in times of failure.
B. Both designs will provide the same percentage ofconnectivityin times of failure.
C. Diagram A's architecture will provide the highest percentage of connectivity in times of failure.
D. Neither design is properly architected to work around the displayed failure.
正解：A
質問 3：
Which two statements describe the benefits provided by firewall services deployed by NSX? (Choose two.)
A. Firewall services providing edge security services uses a virtual appliance and is centrally managed.
B. Firewall services deployed using a software appliance will provide east-west traffic filtering and security.
C. Firewall services deployed using a distributed kernel module will provide east-west traffic filtering and security.
D. Firewall services providing edge security services uses a distributed kernel module.
正解：A,C
質問 4：
Which Layer 2 bridge is supported by the Distributed Router?
A. VXLAN to PVLAN bridge
B. VCD-NI to PVLAN bridge
C. VCD-NI to VLAN bridge
D. VXLAN to VLAN bridge
正解：D
質問 5：
A vSphere administrator added a new interface to a Distributed Router with a subnet of 172.16.10.0/24 and wants to make this subnet reachable to the rest of the network. How can the vSphere administrator achieve this?
A. Enable OSPF on the Distributed Router. Configure the uplink interface in the Backbone area and the new interface with the subnet 172.16.10.0/24 in a normal area.
B. Enable OSPF on the Distributed Router. Configure the uplink interface in the Backbone area and redistribute into OSPF the 172.16.10.0/24 subnet.
C. Enable OSPF on the Distributed Router. Configure the uplink interface in the Backbone area and redistribute from OSPF the 172.16.10.0/24 subnet.
D. Enable OSPF in the Distributed Router. Configure the uplink interface in the normal area and the new interface with the subnet 172.16.10.0/24 in a Backbone area.
正解：A
質問 6：
A user needs to be given the ability to make configuration changes on a specific NSX Edge device. What role and scope could be used to meet this requirement?
A. Security Administrator role and No restriction scope
B. NSX Administrator role and No restriction scope
C. Security Administrator role and Limit Access scope
D. NSX Administrator role and Limit Access scope
正解：C
質問 7：
Where does an administrator configure logging for the NSX Manager?
A. In the NSX Manager GUI
B. In the vSphere Syslog Collector
C. In the NSX Manager command line interface (CLI)
D. In the vSphere Web Client
正解：A
質問 8：
An administrator wants to perform Activity Monitoring on a large group of virtual machines in an NSX environment. How would this task be accomplished with minimal administrative effort?
A. Create a PowerCLI script to enable virtual machine data collection on each virtual machine.
B. Add the virtual machines to the pre-defined Activity Monitoring security group in Service Composer.
C. Create a security group in Service Composer and add the virtual machines to the security group.
D. Add the virtual machines to a VM folder in vCenter Server and enable data collection.
正解：B
林*草 -
VCPN610問題集をよく理解して暗記して、ぜひ無事に試験に合格しますよ。この問題集は信頼られる。私はVCPN610試験に合格しました。